How do you know if the timing belt and water pump are replaced on ...
Well in a nut shell any Honda that is older than 1998 should change its timing belt and water pump around the 100,000 km mark in Canada according to the owner's manual. In this article we will be discussing the issues of timing belt and water pump replacement. Timing belt and water pump on any vehicle is a standard maintenance issue. So what is the guide line for changing the water pump and timing belt you ask. Unless other makes the Honda engine is very well designed with very little room to spare, due to this high tech precision engineering if the timing belt snaps the engine cylinders will crash into each other. Since to replace an engine can cost you between $3000 - $5000 timing belt replacements cost of $400 - $600 is relatively cheap and essential to the engine. If you are looking for a quality used car then Honda is definitely a good choice of brand due to its high resale value, as well as the reliability of a Honda. This will not require a timing chain replacement because it suppose to last life time of the vehicle. 4 liter I-VTEC engines used on 2003 Accords and up, as well as 2002 CRVs and up that is running on a metal timing chain. If it is newer than 1998 including the 98 models, the timing belt changing interval will be set to 160,000 km. But there are some models of Hondas such as the 2. 0 liter Single Overhead Cam engine mainly used on Odysseys, Accord V6, and Pilot will require the timing belt changed at the 160,000 km interval. In the last article we discussed about Honda's body panel VIN etching practice that can easily showcase if the vehicle body panel has been replaced or not. If the job was performed at a Honda dealer, you will most likely have a sticker close to the engine cover area that will indicate the job has been done.






















Through last week, skimming vessels had collected about 671000 barrels of oily water mixture — 28 million gallons — since shortly after BP's Macondo well
I believe what it's going to do is pump the oil water mixture that gets on board into the various tanks there. And it has probably 10 or 12 different size
Engineers and oil industry experts say that if the heavy mud BP plans to pump into the existing well from underneath at its source doesn't stop the flow,